Review



thinky planetary centrifugal mixer  (Thinky Corporation)

 
  • Logo
  • About
  • News
  • Press Release
  • Team
  • Advisors
  • Partners
  • Contact
  • Bioz Stars
  • Bioz vStars
    • 86
      Buy from Supplier

    Structured Review

    Thinky Corporation thinky planetary centrifugal mixer
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Thinky Planetary Centrifugal Mixer, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/pmc12913984-162-22-22?v=Thinky+Corporation
    Average 86 stars, based on 1 article reviews
    thinky planetary centrifugal mixer - by Bioz Stars, 2026-07
    86/100 stars

    Images

    1) Product Images from "Chemical staining for fundamental studies and optimization of binders in Li-ion battery negative electrodes"

    Article Title: Chemical staining for fundamental studies and optimization of binders in Li-ion battery negative electrodes

    Journal: Nature Communications

    doi: 10.1038/s41467-026-69002-1

    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary centrifugal mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Figure Legend Snippet: a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary centrifugal mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.

    Techniques Used: Modification



    Similar Products

    thinky planetary centrifugal mixer  (Thinky Corporation)
    86
    Thinky Corporation thinky planetary centrifugal mixer
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Thinky Planetary Centrifugal Mixer, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/pmc12913984-162-22-22?v=Thinky+Corporation
    Average 86 stars, based on 1 article reviews
    thinky planetary centrifugal mixer - by Bioz Stars, 2026-07
    86/100 stars
    		  Buy from Supplier
    centrifugal planetary mixer thinky  (Thinky Corporation)
    86
    Thinky Corporation centrifugal planetary mixer thinky
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Centrifugal Planetary Mixer Thinky, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 86/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/10__3390_slash_ceramics8030115-56-12-15?v=Thinky+Corporation
    Average 86 stars, based on 1 article reviews
    centrifugal planetary mixer thinky - by Bioz Stars, 2026-07
    86/100 stars
    		  Buy from Supplier
    planetary centrifugal mixer thinky mixer® are310  (Thinky Corporation)
    90
    Thinky Corporation planetary centrifugal mixer thinky mixer® are310
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Planetary Centrifugal Mixer Thinky Mixer® Are310, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/us12334495-194-16-20?v=Thinky+Corporation
    Average 90 stars, based on 1 article reviews
    planetary centrifugal mixer thinky mixer® are310 - by Bioz Stars, 2026-07
    90/100 stars
    		  Buy from Supplier
    planetary centrifugal mixer thinky mixer  (Thinky Corporation)
    90
    Thinky Corporation planetary centrifugal mixer thinky mixer
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Planetary Centrifugal Mixer Thinky Mixer, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/us12318838-140-26-28?v=Thinky+Corporation
    Average 90 stars, based on 1 article reviews
    planetary centrifugal mixer thinky mixer - by Bioz Stars, 2026-07
    90/100 stars
    		  Buy from Supplier
    planetary/centrifugal mixer thinky sr-500  (Thinky Corporation)
    90
    Thinky Corporation planetary/centrifugal mixer thinky sr-500
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Planetary/Centrifugal Mixer Thinky Sr 500, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/us12275184-297-12-16?v=Thinky+Corporation
    Average 90 stars, based on 1 article reviews
    planetary/centrifugal mixer thinky sr-500 - by Bioz Stars, 2026-07
    90/100 stars
    		  Buy from Supplier
    planetary centrifugal mixer thinky ar-100 conditioning mixer  (Thinky Corporation)
    90
    Thinky Corporation planetary centrifugal mixer thinky ar-100 conditioning mixer
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Planetary Centrifugal Mixer Thinky Ar 100 Conditioning Mixer, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/pmc11956898-55-20-22?v=Thinky+Corporation
    Average 90 stars, based on 1 article reviews
    planetary centrifugal mixer thinky ar-100 conditioning mixer - by Bioz Stars, 2026-07
    90/100 stars
    		  Buy from Supplier
    planetary centrifugal mixer thinky mixer are250  (Thinky Corporation)
    90
    Thinky Corporation planetary centrifugal mixer thinky mixer are250
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Planetary Centrifugal Mixer Thinky Mixer Are250, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/pm40117952-81-35-37?v=Thinky+Corporation
    Average 90 stars, based on 1 article reviews
    planetary centrifugal mixer thinky mixer are250 - by Bioz Stars, 2026-07
    90/100 stars
    		  Buy from Supplier
    planetary centrifugal mixer thinky mixer are-250  (Thinky Corporation)
    90
    Thinky Corporation planetary centrifugal mixer thinky mixer are-250
    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary <t>centrifugal</t> mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.
    Planetary Centrifugal Mixer Thinky Mixer Are 250, supplied by Thinky Corporation, used in various techniques. Bioz Stars score: 90/100, based on 1 PubMed citations. ZERO BIAS - scores, article reviews, protocol conditions and more
    https://www.bioz.com/product/thinky+planetary+centrifugal+mixer/us12240991-488-24-27?v=Thinky+Corporation
    Average 90 stars, based on 1 article reviews
    planetary centrifugal mixer thinky mixer are-250 - by Bioz Stars, 2026-07
    90/100 stars
    		  Buy from Supplier

    Image Search Results


    a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary centrifugal mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.

    Journal: Nature Communications

    Article Title: Chemical staining for fundamental studies and optimization of binders in Li-ion battery negative electrodes

    doi: 10.1038/s41467-026-69002-1

    Figure Lengend Snippet: a Schematics of the preparation and mass composition of electrode slurries using initially dilute 1.5% wt. CMC (standard slurry) or initially concentrated 3% wt. CMC (modified slurry). In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary centrifugal mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries. The inset shows an SEM image of a CBD cluster. c Logarithmic histograms of CBD cluster size distribution in standard and modified electrodes, based on analysis of 10 BEI images of each electrode. d Violin plots showing the distribution of electronic resistivity of standard and modified electrode coatings before and after calendering, determined by four-point probe measurements. Five (uncalendared) and eight (calendared) samples of each coating were measured ten times each. Sample properties are summarised in Supplementary Table . BEI image segmentation and CBD clustering analysis were done as described in “Methods”. Source data are provided as a Source Data file.

    Article Snippet: In both protocols, each 2000 rpm mixing step was preceded by 1 min premixing at 500 rpm; mixing was done in a Thinky planetary centrifugal mixer. b Colour-enhanced top-surface BEI of brominated electrodes prepared from standard and modified slurries.

    Techniques: Modification